Frame Basement Walls Vapor Barrier


Frame Basement Walls Vapor Barrier

Frame Basement Walls Vapor Barrier - There are numerous ways to help prevent moisture damage issues in a cellar. The first rule of thumb is no dirt basements. Although these are less prevalent in this day in age, it is good to point out this dirt flooring not just hold a large amount of moisture but also can give off a variety of gases. When building a cellar, make certain that you have a floor drain with a trap installed in the lowest point of the floor.

Without a floor drain, any water that's spilled inside cannot escape. If needed, install a sump pump and make sure the sump cover is tightly sealed. Sump pumps are usually used where flood because of a high water table may be a problem. Additionally, waterproof the outside of the foundation walls and install a perimeter drainage system. A frequently overlooked problem in basements is moisture that comes from humidity.

The easiest way to control humidity would be to exhaust water vapor produced in the house to the outside. Indications of high humidity comprise condensation on walls, pipes or other surfaces as well an overall sense of moisture from the air, dampness, and smells. Often, the humidity will be caused by exposing the cellar to external air (open windows), using wet laundry hung to dry from the cellar, storing firewood from the cellar, and/or a dryer vent that exhausts inside.

In warm, humid weather, keep cellar windows shut. The real key to maintaining basement humidity low would be to keep them well ventilated and keep extra moisture from the cellar.

Tags: #frame basement walls vapor barrier #framing a basement wall vapor barrier