Wood Wall Paneling For Basement - Your cellar does not need to be fully underground either to possess potential problems with water. Even sloping sites where your cellar is built into a hill side or has only 1 wall with ground up against it means that you could have a problem with water later on. So what are your Basement Tanking Alternatives. ?
Simplified you will find just two ways of tanking a cellar. The first technique is to use an outside program. These programs when applied to the outside of the construction form a barrier to stop water penetrating the building. To use this approach you can only really do this when constructing a new cellar. (for the obvious reasons). The region to pay close attention to is the wall flooring intersection. Successful outside cellar tanking means forming a watertight membrane barrier both under the cement slab and up the vertical surfaces efficiently creating a watertight tank around your cellar.
It has advantages of maintaining the building dry and using the power of any water current to push the membrane on the structure. Many designers use a land drain at adjacent externally to the wall floor intersection footing. This is where water pressure is at its best and the soil drain intercepts water and diverts it in the applied membrane and also the construction.
Please be aware that though it might seem simple in principle that the detailing and site requirements can be a substantial problem in receiving these systems put in correctly. It just takes one mistake in workmanship in employing external cellar tanking products and you could have a really waterproofing disaster. Wet, muddy and also very cold states might not suit the manufacturer's recommendations when employing this sort of system be very aware that unless you follow their guidelines you might have no recourse if things go wrong.