Adding Radiant Floor Heat To An Existing Basement - Basement Tanking simplified means keeping water out of your basement or below the ground structure. Your basement doesn't have to be fully underground either to possess potential issues with water. Even sloping sites where your basement is built into a hill side or has just one wall with ground up against it means that you might have a problem with water in the future. So what are your Basement Tanking Alternatives. ?
Simplified you will find two means of tanking a basement. The first method is to utilize an outside program. These programs when applied to the outside of the structure form a barrier to stop water entering the construction. To utilize this strategy you can only do so when building a new basement. (for the obvious reasons). Successful outside basement tanking means forming a waterproof membrane barrier both under the concrete slab and up the vertical surfaces effectively creating a waterproof tank around your basement.
This has advantages of keeping the building dry and employing the power of any water present to push the membrane onto the structure. Many manufacturers use a land drain at adjoining externally to the wall floor junction footing. This is where water pressure is at its best and the land drain intercepts water and diverts it from the applied membrane and the structure.
Please be aware that although it might appear easy in principle that the detailing and site conditions can be a substantial problem in getting these systems placed in properly. It only takes one mistake in workmanship in employing external basement tanking products and you could have a really waterproofing disaster. Wet, muddy and also very cold states might not suit the manufacturer's recommendations when employing this type of system be very conscious that unless you follow their guidelines you might not have any recourse if things go wrong.