Basement Wall Vapor Barrier Insulation - There are numerous ways to help prevent moisture damage problems in a basement. The very first guideline isn't a dirt basements. Though these are somewhat less common in this day in age, it is good to point out this dirt floors not only hold a large amount of moisture but also can give off a variety of gases. When building a basement, make certain that you have a floor drain with a trap installed at the bottom point of the floor.
With no floor drain, any water that's spilled inside cannot escape. Sump pumps are often used where flooding due to a high water table might be a issue. In addition, waterproof the exterior of the foundation walls and put in a perimeter drainage system. A frequently overlooked problem in bathrooms is moisture that comes from humidity.
The easiest way to control humidity is to exhaust water vapor generated in the house to the exterior. Indications of high humidity comprise condensation on walls, pipes or other surfaces as well a general sense of moisture in the air, dampness, and odors. Often, the humidity will be caused by exposing the basement to outside air (open windows), having wet laundry hung to dry in the basement, storing firewood in the basement, and/or a drier vent that exhausts indoors.
To decrease humidity, there are numerous things that a homeowner can perform: install energy-efficient windows, insulate walls and cold water pipes, insulate floors if at all possible, run drier vents to exhaust straight outside and do not dry laundry or firewood on your basement. In summer, use a portable air conditioner or air conditioning to decrease humidity. In hot, humid weather, keep basement windows closed. The real key to keeping basement humidity is to keep them well ventilated and keep additional moisture out of the basement.