Ideas For Finishing A Basement Floor - There are several approaches to help prevent moisture damage issues at a basement. The first guideline isn't a dirt basements. Although these are somewhat less common in this day in age, it is a good idea to point out that dirt flooring not only hold a huge amount of moisture but can also give off a number of gases. When building a basement, make sure you've got a floor drain using a trap installed in the bottom point of the floor.
With no floor drain, any water that is spilled inside cannot get out. If necessary, install a sump pump and make sure that the sump cover is tightly sealed. Sump pumps are often used where flooding due to a high water table may be a issue. Additionally, waterproof the exterior of the foundation walls and put in a perimeter drainage system. An often overlooked problem in basements is moisture that comes from humidity.
The simplest way to control humidity would be to exhaust water vapor generated in the house to the exterior. Indications of high humidity comprise condensation on windows, pipes or other surfaces as well an overall sense of moisture from the atmosphere, dampness, and odors. Often, the humidity will be caused by exposing the basement to external air (open windows), using wet laundry hung to dry from the basement, storing firewood from the basement, or a drier vent that exhausts indoors.
In summer, use a portable dehumidifier or air conditioning to reduce humidity. In hot, humid weather, maintain basement windows closed. Run the furnace fan continuously to circulate house air. The real key to keeping basement humidity would be to keep them well ventilated and to keep additional moisture from the basement.