Ventilation Fan For Basement Bathroom - There are numerous ways to help avoid moisture damage issues at a basement. The first rule of thumb isn't a dirt basements. Although these are less prevalent in this day in age, it is a good idea to point out that dirt floors not only hold a huge amount of moisture but can also give off a number of gases. When constructing a basement, make sure you've got a floor drain with a trap installed in the bottom point of the floor.
Without a floor drain, any water that's spilled inside can't get out. Sump pumps are usually used where flood due to a high water table may be a issue. In addition, waterproof the outside of the foundation walls and install a perimeter drainage system. A frequently overlooked problem in basements is moisture that comes out of humidity.
The simplest way to control humidity is to exhaust water vapor produced in the house to the outside. Signs of high humidity comprise condensation on windows, pipes or other surfaces as well a general awareness of moisture in the air, dampness, and odors. Many times, the humidity is going to be caused by exposing the basement to external air (open windows), using wet laundry hung to dry in the basement, keeping firewood in the basement, or a dryer vent that exhausts inside.
To decrease humidity, there are numerous things a homeowner can do: install energy-efficient windows, insulate walls and cold water pipes, prefinished flooring if possible, run dryer vents to exhaust directly outside and do not dry laundry or firewood on your basement. In summer, use a portable air conditioner or air conditioning to decrease humidity. In warm, humid weather, keep basement windows closed. Run the furnace fan continuously to circulate house air. The key to keeping basement humidity is to keep them well ventilated and to keep extra moisture out of the basement.