Basement Floor Plans 1000 Sq Ft - There are several approaches to help avoid moisture damage problems at a basement. The very first rule of thumb is no dirt basements. Though these are somewhat less common in this day in age, it is a good idea to point out that dirt floors not only hold a huge amount of moisture but also can give off a variety of gases. When constructing a basement, make sure you've got a floor drain with a trap installed at the bottom point of the floor.
With no floor drain, any water that's spilled inside cannot get out. If needed, install a sump pump and ensure that the sump cover is tightly sealed. Sump pumps are usually used where flooding because of a high water table might be a issue. Additionally, waterproof the exterior of the foundation walls and put in a perimeter drainage system. An often overlooked problem in basements is moisture that comes from humidity.
The easiest way to control humidity would be to exhaust water vapor produced in the home to the exterior. Indications of high humidity comprise condensation on walls, pipes or other surfaces as well a general sense of moisture in the air, dampness, and odors. Often, the humidity is going to be brought on by exposing the basement to outside air (open windows), having wet laundry hung to dry in the basement, keeping firewood in the basement, or a dryer vent that exhausts inside.
In summer, use a portable air conditioner or air conditioning to decrease humidity. In hot, humid weather, maintain basement windows shut. The key to keeping basement humidity low would be to keep them well ventilated and keep additional moisture out of the basement.