Basement Pole Wraps - There are numerous approaches to help avoid moisture damage issues in a basement. The first guideline is no dirt basements. Though these are less prevalent in this day in age, it is a good idea to point out that dirt flooring not only hold a large amount of moisture but can also give off a variety of gases. When building a basement, make certain that you have a floor drain using a trap installed in the bottom point of the ground.
Without a floor drain, any water that's spilled inside can't get out. If necessary, install a sump pump and ensure that the sump cover is tightly sealed. Sump pumps are usually used where flooding due to a high water table might be a issue. In addition, waterproof the exterior of the base walls and install a perimeter drainage system. An often overlooked problem in bathrooms is moisture that comes out of humidity.
The easiest way to control humidity would be to exhaust water vapor produced in the home to the exterior. Indications of high humidity comprise condensation on walls, pipes or other surfaces as well an overall sense of moisture from the atmosphere, dampness, and smells. Many times, the humidity will be caused by exposing the basement to outside air (open windows), having wet laundry hung to dry from the basement, storing firewood from the basement, or a drier vent that exhausts indoors.
To reduce humidity, there are numerous things a homeowner can do: install energy-efficient windows, insulate walls and cold water pipes, insulate floors if at all possible, run drier vents to exhaust directly outside and do not dry laundry or firewood on your basement. In summer, use a portable dehumidifier or air conditioning to reduce humidity. In warm, humid weather, maintain basement windows closed. Run the furnace fan continuously to circulate home air. The real key to maintaining basement humidity would be to keep them well ventilated and keep extra moisture out of the basement.