Insulation Panels For Basement Walls - There are numerous ways to help prevent moisture damage problems in a cellar. The very first rule of thumb isn't a dirt basements. Though these are somewhat less common in this day in age, it's a good idea to point out that dirt flooring not only hold a large amount of moisture but can also give off a variety of gases. When constructing a cellar, make sure you've got a floor drain using a trap installed at the bottom point of the floor.
Without a floor drain, any water that is spilled inside can't escape. If necessary, install a sump pump and make sure the sump cover is tightly sealed. Sump pumps are usually used where flooding because of a high water table may be a issue. Additionally, waterproof the outside of the foundation walls and install a perimeter drainage system. An often overlooked problem in basements is moisture that comes from humidity.
The simplest way to control humidity would be to exhaust water vapor produced in the home to the outside. Indications of high humidity comprise condensation on walls, pipes or other surfaces as well a general sense of moisture in the air, dampness, and odors. Many times, the humidity will be brought on by exposing the cellar to external air (open windows), using wet laundry hung to dry in the cellar, storing firewood in the cellar, or a drier vent that exhausts indoors.
To reduce humidity, there are numerous things a homeowner can do: install energy-efficient windows, insulate walls and cold water pipes, prefinished flooring if at all possible, run drier vents to exhaust straight out and do not dry laundry or firewood in your cellar. In warm, humid weather, keep cellar windows closed. The key to maintaining basement humidity would be to keep them well ventilated and to keep additional moisture out of the cellar.