Basement To Beautiful Insulation Panels

21 views

Basement To Beautiful Insulation Panels


Basement To Beautiful Insulation Panels - There are numerous approaches to help avoid moisture damage problems in a cellar. The very first rule of thumb is no dirt basements. Although these are somewhat less common in this day in age, it's good to point out that dirt floors not only hold a huge amount of moisture but also can give off a variety of gases. When building a cellar, make certain that you've got a floor drain using a trap installed at the lowest point of the ground.

Without a floor drain, any water that's spilled inside can't escape. Sump pumps are usually used where flooding because of a high water table may be a problem. Additionally, waterproof the exterior of the base walls and put in a perimeter drainage system. An often overlooked problem in basements is moisture that comes from humidity.


The simplest way to control humidity is to exhaust water vapor generated in the home to the exterior. Indications of high humidity comprise condensation on walls, pipes or other surfaces as well an overall awareness of moisture from the atmosphere, dampness, and smells. Many times, the humidity will be caused by exposing the cellar to external air (open windows), using wet laundry hung to dry from the cellar, keeping firewood from the cellar, and/or a dryer vent that exhausts inside.

To decrease humidity, there are numerous things a homeowner can perform: install energy-efficient windows, insulate walls and cold water pipes, prefinished flooring if possible, run dryer vents to exhaust straight outside and do not dry laundry or firewood on your cellar. In summer, use a portable dehumidifier or air conditioning to decrease humidity. In hot, humid weather, keep cellar windows closed. The real key to maintaining basement humidity low is to keep them well ventilated and keep extra moisture out of the cellar.