Basement Systems Of New Hampshire Complaints - There are several approaches to help prevent moisture damage problems at a cellar. The very first guideline is no dirt basements. Though these are somewhat less prevalent in this day in age, it's good to point out that dirt floors not only hold a large amount of moisture but can also give off a variety of gases. When constructing a cellar, make certain that you have a floor drain with a trap installed at the lowest point of the floor.
Without a floor drain, any water that's spilled inside cannot get out. If necessary, install a sump pump and ensure the sump cover is tightly sealed. Sump pumps are usually used where flooding due to a high water table might be a issue. Additionally, waterproof the exterior of the base walls and put in a perimeter drainage system. An often overlooked problem in basements is moisture that comes out of humidity.
The easiest way to control humidity would be to exhaust water vapor generated in the home to the exterior. Indications of high humidity include condensation on windows, pipes or other surfaces as well an overall sense of moisture in the atmosphere, dampness, and odors. Many times, the humidity will be brought on by exposing the cellar to external air (open windows), having wet laundry hung to dry in the cellar, keeping firewood in the cellar, and/or a drier vent that exhausts indoors.
To reduce humidity, there are several things a homeowner can perform: install energy-efficient windows, insulate walls and cold water pipes, prefinished flooring if possible, run drier vents to exhaust directly out and do not dry laundry or firewood in your cellar. In summer, use a portable dehumidifier or air conditioning to reduce humidity. In hot, humid weather, maintain cellar windows closed. The real key to maintaining basement humidity low would be to keep them well ventilated and to keep extra moisture from the cellar.