Cork Flooring Basement Bathroom - There are numerous approaches to help avoid moisture damage problems at a basement. The first rule of thumb is no dirt basements. Though these are somewhat less prevalent in this day in age, it is good to point out this dirt floors not only hold a large amount of moisture but can also give off a variety of gases. When constructing a basement, make sure you have a floor drain using a trap installed at the bottom point of the floor.
With no floor drain, any water that is spilled inside cannot get out. If needed, install a sump pump and make sure the sump cover is tightly sealed. Sump pumps are often used where flooding because of a high water table might be a problem. In addition, waterproof the outside of the foundation walls and install a perimeter drainage system. An often overlooked problem in bathrooms is moisture that comes out of humidity.
The simplest way to control humidity would be to exhaust water vapor produced in the home to the outside. Signs of high humidity comprise condensation on walls, pipes or other surfaces as well an overall sense of moisture in the air, dampness, and smells. Many times, the humidity is going to be brought on by exposing the basement to external air (open windows), using wet laundry hung to dry in the basement, keeping firewood in the basement, and/or a drier vent that exhausts indoors.
In hot, humid weather, keep basement windows closed. The key to keeping basement humidity would be to keep them well ventilated and to keep additional moisture out of the basement.