Andersen Basement Window Sizes

134 views

Andersen Basement Window Sizes


Andersen Basement Window Sizes - There are numerous approaches to help avoid moisture damage issues at a cellar. The very first rule of thumb is no dirt basements. Though these are somewhat less common in this day in age, it is good to point out this dirt flooring not only hold a large amount of moisture but can also give off a number of gases. When constructing a cellar, make certain that you have a floor drain with a trap installed at the lowest point of the floor.

With no floor drain, any water that's spilled inside can't escape. If needed, install a sump pump and make sure the sump cover is tightly sealed. Sump pumps are usually used where flooding due to a high water table might be a problem. Additionally, waterproof the exterior of the base walls and install a perimeter drainage system. An often overlooked problem in basements is moisture that comes from humidity.


The simplest way to control humidity is to exhaust water vapor generated in the house to the exterior. Indications of high humidity comprise condensation on walls, pipes or other surfaces as well an overall awareness of moisture from the atmosphere, dampness, and smells. Often, the humidity is going to be brought on by exposing the cellar to external air (open windows), using wet laundry hung to dry from the cellar, storing firewood from the cellar, or a drier vent that exhausts indoors.

To decrease humidity, there are numerous things a homeowner can do: install energy-efficient windows, insulate walls and cold water pipes, prefinished flooring if possible, run drier vents to exhaust straight outside and do not dry laundry or firewood on your cellar. In hot, humid weather, maintain cellar windows shut. The key to maintaining basement humidity is to keep them well ventilated and to keep extra moisture out of the cellar.