Cement Basement Floor Cracks - There are numerous ways to help prevent moisture damage issues in a cellar. The very first rule of thumb is no dirt basements. Although these are somewhat less common in this day in age, it is good to point out this dirt floors not just hold a large amount of moisture but can also give off a number of gases. When constructing a cellar, make certain that you have a floor drain using a trap installed at the bottom point of the floor.
With no floor drain, any water that is spilled inside can't get out. If needed, install a sump pump and make sure that the sump cover is tightly sealed. Sump pumps are often used where flooding because of a high water table may be a issue. In addition, waterproof the exterior of the foundation walls and install a perimeter drainage system. An often overlooked problem in bathrooms is moisture that comes out of humidity.
The simplest way to control humidity would be to exhaust water vapor produced in the home to the exterior. Indications of high humidity comprise condensation on windows, pipes or other surfaces as well a general awareness of moisture in the atmosphere, dampness, and odors. Many times, the humidity will be brought on by exposing the cellar to external air (open windows), having wet laundry hung to dry in the cellar, storing firewood in the cellar, or a drier vent that exhausts inside.
To decrease humidity, there are numerous things that a homeowner can do: install energy-efficient windows, insulate walls and cold water pipes, prefinished flooring if possible, run drier vents to exhaust directly out and don't dry laundry or firewood in your cellar. In hot, humid weather, maintain cellar windows closed. Run the furnace fan continuously to circulate home air. The real key to maintaining basement humidity low would be to keep them well ventilated and keep additional moisture out of the cellar.