Finished Basement Floor Plans

20 views

Finished Basement Floor Plans


Finished Basement Floor Plans - There are several ways to help avoid moisture damage problems at a cellar. The very first guideline isn't a dirt basements. Although these are less prevalent in this day in age, it's good to point out that dirt floors not just hold a large amount of moisture but can also give off a variety of gases. When constructing a cellar, make certain that you've got a floor drain using a trap installed in the lowest point of the ground.

Without a floor drain, any water that is spilled inside cannot get out. If needed, install a sump pump and make sure the sump cover is tightly sealed. Sump pumps are often used where flood due to a high water table may be a problem. In addition, waterproof the outside of the foundation walls and install a perimeter drainage system. An often overlooked problem in basements is moisture that comes out of humidity.


The simplest way to control humidity would be to exhaust water vapor produced in the home to the outside. Signs of high humidity comprise condensation on walls, pipes or other surfaces as well a general awareness of moisture in the air, dampness, and smells. Often, the humidity will be brought on by exposing the cellar to outside air (open windows), using wet laundry hung to dry in the cellar, keeping firewood in the cellar, or a dryer vent that exhausts indoors.

In summer, use a portable dehumidifier or air conditioning to reduce humidity. In warm, humid weather, keep cellar windows shut. The real key to keeping basement humidity would be to keep them well ventilated and to keep extra moisture from the cellar.