Insulating Basement Walls With Foam Board And Fiberglass


Insulating Basement Walls With Foam Board And Fiberglass

Insulating Basement Walls With Foam Board And Fiberglass - If you are living in the Tampa Bay area, you might not be accustomed to seeing many homes with basementsnonetheless, believe it or not, there are numerous homes throughout the area that do in fact have basements. Most homes in Florida are built without cellar because of hurricane related issues. Construction codes insist that dwelling floors be built above storm surge elevation. When a basement is allowed to be built, it usually is built as a "non-livable" area, so, in other words, homeowners can have the basement for extra storage minus bedrooms.

In regards to basement problems, moisture is the most common issue in the cellar. The moisture commonly enters from outside sources though can also be created inside also. Often, most homeowners are unaware that the soil around the basement walls can contain a large amount of moisture.

The cause of elevated moisture content in the soil may incorporate surface water that is seeping into the ground or even from a high water table. A high water table may be explained by heavy rains that cause the water to rise higher than the cellar floor. Often, water can find its way inside a cellar by gravity or through a crack or defect in the water protection layer of the base.

In the summer, warm moist air from outside could enter the home and lead to condensation on the trendy basement walls or flooring. In regions that may experience freezing temperatures, the following situation can happen if there is a crack present: the water will enter through the crack then freeze and expand. With each cold season, the crack will eventually get larger due to the expansive properties of the suspended water.

Tags: #insulating basement walls with foam board and fiberglass #insulating basement walls with rigid foam and fiberglass